The art of making candles has been around since primitive times. Of course, as time went by they become much different in design than what they were back then. In the early days, candles were a necessity for heat and light. Today they serve as decorations, wonderfully smelling mechanisms in our homes, and offer light for romantic dinners and baths.
The first known use of candles is not completely known. The remains of clay candle holders that date back to 4 BC have given us the knowledge that they have been in use for a very long time. Those clay candle holders were found in Egypt.
Candles were also used in ancient times in both China and Japan. These candles were made of wax extracted from insects and seeds. The taper candles of India were made from the wax extracted from boiled cinnamon. Candles are not known to exist in American until 1 AD. It is believed Native American’s burned oily fish and the back of the Cerio tree. When settlers came to New England, they used similar techniques to extract wax from bayberries. Many modern candle makers still use that process to make bayberry candles. However, it is quite expensive to do so.
Tallow was the product used to make candles in the 1600’s and 1700’s. This is a byproduct from animal fat. The product worked well but had a foul odor, especially when it was burning. Bees wax and paraffin wax both were introduced in the early 1800’s, and tallow stopped being used.
The dipping process for taper candles as we know it today began in 13 AD. Traveler merchants went door to door from town to town. While there, they made taper candles for individuals in their homes. Around 15 AD the idea to use molds for various types of candles was introduced in Paris. While this greatly improved the candle making process, there were still issues with getting the candles to burn properly.
In the 1800’s, candle makers felt the wick was the weakest area of the candle as well as the cause for defective burning patterns. A braided wick was developed in 1825 that seemed to greatly improve the burning of several types of candles. By 1830, a process was in place to make candles using paraffin wax and molds. These candles were of good quality and burned well.
As gas and electricity were introduced, the candle making process continued to evolve. It became much easier and faster to melt the paraffin wax. It is believed that the reason so many of the elements of candle making stayed the same, including the hand dipping process is because the popularity of candles diminished with the introduction of electricity.
Today, candle making is a well known art form. There are many companies who manufacture wonderful candles with some very unique fragrances. There are also small businesses that still make their candles by home in their kitchen. Candle making is a great hobby and fun activity for the whole family to be involved in.
Candles are now used more for luxury and pleasure than for light or heat. The candle industry continues to grow with new types of candles being introduced all the time. The amount of colors, fragrances, and types of candles to choose from in the marketplace is absolutely amazing.
Candles are a very common home decorating item. They are used to accent any room in your house. They are a common centerpiece for dinner parties and formal occasions. The unity candles that are presided over at many weddings hold a deep sense of tradition in the American culture. Maria Marcotte
Thursday, May 14, 2009
Candle making by Maria Marcotte
The Process of Candle Making
Making candles is fun and relaxing. While it does give you the opportunity to be creative, there are some basic candle making steps you need to follow to make the process flow well. Nothing is more disappointing than discovering your candles didn’t form correctly. Safety is very important in candle making. Most people make candles in their own kitchen. You will want to have a fire extinguisher handy as well as a non slip mat placed in from of your stove. Always wear old clothing and long sleeves. However, make sure your sleeves don’t dangle where they can fall into the hot wax.
Since you will have to get the candle wax very hot to melt completely, there is the risk of severe burns. You also have the risk of starting a fire. It is important to clean up all spilled wax immediately. It won’t take long for it to harden, thus becoming very slippery. The dyes and scents used in candle making can leave stains.
The best way to set up your work area for candle making is to divide it into three specific work stations for preparation, the melting process, and the cooling process. The preparation area doesn’t need to be large, just a flat surface that is well organized. To make the process flow best, use a counter in close proximity to the stove. You will want to keep your utensils, thermometer, additives, and other candle making supplies in this area. It is a good idea to know what types of candles you will be making ahead of time so that you have all the necessary items ready to go.
Your melting work station will likely be the stove. You will need to use a double boiler to melt the wax to a temperature that is hot enough without scorching it. The molecular structure of the wax can be damaged if the direct heat to it is too much. This means your candles won’t form well or hold up well when they are used. Wax comes in sheets or blocks. You will need to chip off chunks to melt. A hammer and flat head screwdriver work well for this.
Chipping wax should be done in the preparation stage so that you can simply add more pieces throughout the melting process. You will want to weigh each piece of wax before you add it to the pot for melting. This will help you determine how much scent and dye to add, which is based on weight.
The cooling station needs to be a flat area such as a countertop or table. The wax needs to cool for several hours so this area needs to be able to withstand high temperatures as well as remain undisturbed for long periods of time. The area should not be directly in the path of sunlight or heating/cooling systems. If it is, the candles will not set properly. If you plan to use molds for your candles, have them set up in the cooling area while the wax is melting. Once it is done melting, you will need to pour it immediately into the molds. To prevent a mess from spills, use an old cookie sheet for the molds to rest on.
The candle making process will run smooth and efficient if you follow these tips for establishing three work stations. While the process should be fun, it is important that you understand the dangers of candle making including burns and fires. Taking the proper safety precautions will help ensure the creation of candles in your home is a great way to spend your time. Maria Marcotte
Making candles is fun and relaxing. While it does give you the opportunity to be creative, there are some basic candle making steps you need to follow to make the process flow well. Nothing is more disappointing than discovering your candles didn’t form correctly. Safety is very important in candle making. Most people make candles in their own kitchen. You will want to have a fire extinguisher handy as well as a non slip mat placed in from of your stove. Always wear old clothing and long sleeves. However, make sure your sleeves don’t dangle where they can fall into the hot wax.
Since you will have to get the candle wax very hot to melt completely, there is the risk of severe burns. You also have the risk of starting a fire. It is important to clean up all spilled wax immediately. It won’t take long for it to harden, thus becoming very slippery. The dyes and scents used in candle making can leave stains.
The best way to set up your work area for candle making is to divide it into three specific work stations for preparation, the melting process, and the cooling process. The preparation area doesn’t need to be large, just a flat surface that is well organized. To make the process flow best, use a counter in close proximity to the stove. You will want to keep your utensils, thermometer, additives, and other candle making supplies in this area. It is a good idea to know what types of candles you will be making ahead of time so that you have all the necessary items ready to go.
Your melting work station will likely be the stove. You will need to use a double boiler to melt the wax to a temperature that is hot enough without scorching it. The molecular structure of the wax can be damaged if the direct heat to it is too much. This means your candles won’t form well or hold up well when they are used. Wax comes in sheets or blocks. You will need to chip off chunks to melt. A hammer and flat head screwdriver work well for this.
Chipping wax should be done in the preparation stage so that you can simply add more pieces throughout the melting process. You will want to weigh each piece of wax before you add it to the pot for melting. This will help you determine how much scent and dye to add, which is based on weight.
The cooling station needs to be a flat area such as a countertop or table. The wax needs to cool for several hours so this area needs to be able to withstand high temperatures as well as remain undisturbed for long periods of time. The area should not be directly in the path of sunlight or heating/cooling systems. If it is, the candles will not set properly. If you plan to use molds for your candles, have them set up in the cooling area while the wax is melting. Once it is done melting, you will need to pour it immediately into the molds. To prevent a mess from spills, use an old cookie sheet for the molds to rest on.
The candle making process will run smooth and efficient if you follow these tips for establishing three work stations. While the process should be fun, it is important that you understand the dangers of candle making including burns and fires. Taking the proper safety precautions will help ensure the creation of candles in your home is a great way to spend your time. Maria Marcotte
Subscribe to:
Posts (Atom)